Cab Door - Segway Villain SX10 Owner's Manual

Check that all seat belts are in working before each use.
Push the latch plate onto the buckle ring until it clicks. The
latch plate must slide smoothly into the buckle.
Pull out each safety belt and check for any damage, including
cutting, wear or stiffness. If any damage is found, or if the seat
belt does not operate properly, contact a Segway dealer for
Clean dirt or debris on the seat belt and wipe the belt with
mild soap and water. Do not use bleach, dyes or household

CAB DOOR

The vehicle is fitted with a cab door. Driving in this vehicle without closing and
locking the cab door will increase the risk of serious injury or death in the event of
an accident or rollover. When driving the car, make sure all cab doors are closed and
locked.
Be sure to check doors and latches for wear and damage before each use. Replace
any worn or damaged parts promptly and purchase new parts from your authorized
Segway dealer.
Open/close the cab door
Lift the latch up and open the door. Pull the door inward, close the door after
hearing the "click" sound, and check whether the door is locked after closing.
! CAUTION
replacement.
detergents.
2-10