Battery Charging - Segway SGW500F-A7 Owner's Manual

BATTERY CHARGING

When charging, the hydrogen produced by the 12V battery is
combustible explosive gas. Therefore, please follow the following
If charging the 12V battery is still installed in the vehicle, be sure to
Make sure the power switch on the charger is off when connecting and
disconnecting the charger cable to the 12V battery.
Only charge slowly (5A or less). If charge quickly, the 12V battery may
Measures to be taken in an emergency
1. Connect the clamp of the positive jumper cable to the special
jumper starting terminal of the vehicle.
2. Connect the clamp on the other end of the positive cable to
the positive (+) terminal of another vehicle.
3. Connect the negative cable clamp to the negative battery
terminal of another vehicle.
4. As shown, connect the clamp on the other end of the negative
cable to a separate clamp.
5. Place jumper cable terminals firmly on, unpainted metal.
MAINTENANCE,STORAGE AND TRANSPORTATION
NOTICE
precautions before charging:
disconnect the ground cable.
explode.
135