Basic Drving Guide; Trail Etiquette; Know Your Riding Area/Tread Lightly; Vehicle Run-In Period - Segway Villain SX10 Owner's Manual

This section provides basic operating instructions, including how to start and stop
the vehicle, driving skills and precautions when driving on different roadways.
Even if you've ridden other SSVs, you must take time to familiarize yourself with
how the vehicle operates. Practice in flat and wide areas until you are familiar with
this all-terrain vehicle.
Failure to inspect and verify that the vehicle is in safe
operating condition before operating increases the risk of an
accident. Always perform the Pre -Ride Inspection outlined in
the Operation chapter before each use of your
vehicle to make sure it's in safe operating condition. Always
follow the inspection and maintenance procedures and
schedules described in this owner's manual. See the Periodic
Maintenance section of the Maintenance chapter.

BASIC DRVING GUIDE

Trail Etiquette

Always practice good etiquette when riding. Allow a safe distance between your
vehicle and other vehicles operating in the same area. Communicate to oncoming
operators by signaling the number of vehicles in your group. When stopping, move
your vehicle to the edge of the trail as far as possible to allow others to pass safely.

Know your riding area/tread lightly

Familiarize yourself with all laws and regulations concerning the operation of this
vehicle in your area. Respect the environment in which you ride your vehicle.
Find out where the designated riding areas are by contacting your dealer, a local
riding club, or local officials. Help keep our trails open for recreational vehicle use.
Vehicle Run–in period
Your vehicle's run-in-period is the first 25 hours of operation or the riding mileage
which used first two full tanks of fuel. Careful handling of new engine and drive
components will improve the performance and service life of these components.
Follow these steps carefully.
WARNING WARNING
!
3-1