Segway Villain SX10 Owner's Manual page 89

Air filter inlet cap and CVT inlet mesh fabric
1
Air filter inlet cap
Check the air inlet cover of the air filter and the cover of the CVT air inlet pipe
network every time the air filter element is replaced.
The air inlet cover of the air filter is at the front of the air filter. See page 4-6 for
disassembly steps. The cover of CVT air inlet pipe network is located next to the air
filter. After removal, the storage box can be seen. Clean it if necessary, and replace
it if damaged.
When assembling the filter element, please make sure that the buckles
of the filter element and the end cover are installed in place, otherwise it
will cause the engine to malfunction or reduce the service life
When the vehicle is driving in a dusty environment, please shorten the
time interval for checking the filter element
The air filter is soaked or the filter element is wet, please drain the water
2
CVT inlet mesh fabric
WARNING
!
and replace the filter element
4-26