Damping Adjustment Of Shock Absorber - Segway Villain SX10 Owner's Manual

Damping adjustment of shock absorber

In order to adapt to various riding conditions, the preload of the spring can be
adjusted by shock absorber or spring replacement. Damping force can also be
easily adjusted without changing oil viscosity
Compression damping adjustment
• Use a 16mm sleeve to turn the compression damping adjuster
part of the split cylinder block to adjust the compression resistance at high-
speed vibration frequencies. The damping in the clockwise direction (H) is
increased, and the damping in the counterclockwise direction (S) is decreased.
• Use a flat-blade screwdriver to turn the compression damping adjuster
the upper part of the split cylinder block to adjust the compression resistance
at low-speed vibration frequencies. The damping in the clockwise direction
(H) is increased, and the damping in the counterclockwise direction (S) is
decreased.The compression damping regulator has a total of 8 level, the
factory setting gear is the first level
Restoration damping adjustment
Use a flat-blade screwdriver to turn the damping adjuster at the bottom,
instantaneously adjust the damping in the needle direction (H) and decrease the
damping in the counterclockwise direction (S). The restoration damping regulator
has 12 level, and the factory-set gear is the 6th level
4-23
2
on the upper
1
on