Fuse - Segway Villain SX10 Owner's Manual

All circuits on the vehicle have fuses to protect electrical equipment from damage
caused by high current (short circuit or overload).
If any of the electrical parts do not work, the fuse may have blown. If this happens,
check and replace the fuse if necessary. You can consider electrical faults, first
check whether the fuse needs to be replaced, if it is found to have blown, replace
the blown fuse. There is a spare fuse in the fuse box. Check all fuses for other
possible causes. Replace all blown fuses and check the working condition of
components. All fuses are concentrated in the fuse box. In the event of a system
failure, see "Fuse Distribution and Ampere rating" for details of which fuses to check.
• Do not use a fuse above the rated ampere value or replace it
with anything else.
• Please use the same product.Never use wires for fuses, even
temporary replacements are not allowed.
• Do not modify fuses or fuse boxes.
Fuse Box
The fuse box is located under the front instrument panel. Remove the front panel
repair cover as shown in page 4-4.
After the front panel repair cover has been removed, the fuse box is located at the
bottom. Move the clasp on the left and right sides of the fuse box cover. Loosen the
clasp and open the fuse box.
Pay attention to the direction of installation.
The label may be slightly different from the image below.
Normal fuse

FUSE

NOTICE
NOTICE
Blow fuse
4-35