Segway Villain SX10 Owner's Manual page 38

EPS system
Brake system
Parking Brake
Engine Failure
ABS
Coolant
Temperature
Left Turn Left Turn
(if equipped)
High Beam High Beam
light light
Position light Position light
Right turn
(if equipped)
Power icon on
Bluetooth
Remote Power
on
EPS mode
Indicates a failure in EPS system (optional
equipment, if equipped)
• Low brake fluid level
• The braking system is faulty
This light is on after parking brake is applied.
This indicator appears if an EFI-related fault occurs.
Do not operate the vehicle if this warning appears.
Serious engine damage could result.
Indicator light showing excessive temperature of
engine coolant. When it lights up and alarms, the
engine should be stopped immediately and shut
down. After cooling down to normal temperature, the
engine should continue to run.
This light is lit when the left turn signal is turned on.
This lamp illuminates when the headlamp switch is
set to high beam.
The front light, tail light, license plate light and
instrument panel light are on.
This light is lit when the right turn signal is turned on.
The icon will light on when the APP Bluetooth power
is used.
When starting the vehicle through the APP and this
light will be on
EPS mode was set in the APP and the preferred
mode of the rider was selected:
M -Normal mode, power normal
H -Comfort mode, power light
L -Motion mode, booster weight
2-17