Fuse Box Replacement - Segway Villain SX10 Owner's Manual

R1 Remote power-on relay
R2 IG1 relay
R3 Auxiliary start relay
R4 Main relay
R5 High light relay
R6 Low light relay
R7 Day light relay
R8 Fuel pump relay
R9 FAN relay
R10 2-4 Wheel drive relay
R11 4 Wheel drive lock relay

Fuse box Replacement

To prevent an accidental short circuit, turn the ignition switch to the (OFF) position
and check or replace the fuse(s).
To check or replace the circuit fuse, pull out the old fuse with a puller.
The fuse box cover is equipped with a puller. Using this tool will help you take out
the fuse.
The fuse box cover is fitted with a common fuse which can be replaced.
If a replacement fuse suitable for the circuit rating is not
available, install a lower rated fuse.
1
Puller
2
Spare fuse
NOTICE
4-37
12V 20A
12V 20A
12V 20A
12V 20A
12V 20A
12V 20A
12V 20A
12V 20A
12V 20A
12V 20A
12V 20A