Battery Charging - Segway SGW570F-A3 Manual

1. Remove the battery cover screw
2. Remove battery press plate
3. Turn up the Protective rubber sleeve；
4. Remove the battery negative pole screw and disconnect
the black (negative) battery cable.
5. Remove the battery positive pole screw and disconnect
the red (positive) battery cable.
6. Remove the battery from the ATV。

Battery Charging

When charging, the hydrogen produced by the 12V battery
is combustible explosive gas.Therefore, please follow the
following precautions before charging:
If charging the 12V battery is still installed in the vehicle,
be sure to disconnect the ground cable.
Make sure the power switch on the charger is off when
connecting and disconnecting the charger cable to the 12V
battery.
Only charge slowly (5A or less).If charged quickly, the 12V
battery may explode.
MAINTENANCE
1
with a tool；
2 ；
CAUTION
!
157