Air Filter - Segway Villain SX10 Owner's Manual

Hide thumbs Also See for Villain SX10:
Table of Contents

Advertisement

The vehicle utilizes a two-stage air filtration system. The air passes through the
primary filter first and then the secondary air filter last. This two-stage air filtreation
system fully meets the needs of the engine.
The primary air filter must be replaced every time when the air
Replacing the Secondary Air Filter
The air filter element of this vehicle is a paper air filter element. The filter needs to
be replaced after a period of use. For details, see the periodic maintenance table
(page 4-2).
Removal of the air filter cover
1
Air filter cover snap
The air filter is located under the rear storage box, see the disassembly steps (page
4-5).
1.
Remove the 4 buckles
together with the intake pipe.
2.
Take out the air filter element
3.
Take the filter element out of the box, replace the filter element for cleaning or
replacement.
4.
Reinstall the filter element on the filter.
5.
Reinstall the air filter cover.

AIR FILTER

WARNING
WARNING
!
filter element is replaced
2
3
Air filter cover
Air Filter element
1
of the air filter cover, and lift the air filter cover
3
.
4-25
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents