Brake System Run-In; Clutch/Belt; New Operator Driving Procedures - Segway Villain SX10 Owner's Manual

Brake System run-in

In order to achieve the best braking performance, the brake must be No less than
124mi(200Km) run-in when use.
Heavy or excessive braking when using the new braking system may damage the
brake pad and disc.

Clutch/Belt

Proper run-in of the clutch and driving belt will ensure longer service life and better
performance. Run the run-in clutch and belt at low speeds for the recommended
run-in time, only pulling light loads. Avoid violent acceleration and high speed
running during run-in. If the belt is broken, be sure to clean up the Intake and
outlet pipeline and any debris from the clutch and engine compartment during belt
replacement

New Operator Driving Procedures

1. Before operating the vehicle, read and understand the owner's manual and all
warning and instruction labels.
2. Perform a pre-drive check.
3. Do not carry goods during this period.
4. Do not carry passengers until you have driven the vehicle for at least two hours.
5. Choose a suitable and open area to familiarize yourself with the operation of
the vehicle.
6. Safety helmets, eye protection, gloves, long-sleeved shirts, long pants, anti-
ankle boots and safety belts must be worn at all times.
7. When driving this vehicle, make sure that all cab doors are closed and locked.
8. Sit in the driver's seat, fasten your seat belt, and put the transmission in "P" gear.
9. Release the parking brake.
10. Start the engine.
11. Put the transmission in low gear.
12. Check your surroundings and determine your driving route.
13. Hold the steering wheel with both hands, slowly release the brake, depress the
accelerator with your right foot, and start driving.
14. Drive slowly first, and practice starting, stopping, turning, maneuvering, using
the accelerator, brakes, and reversing on a flat ground. When learning how the
vehicle operates, practice turning left and right at a slow speed.
15. When you make a turn proficiently and start running at a faster speed, please
follow the following precautions:
• Avoid sharp turns.
• Do not steer when using high throttle.
• Don't steering suddenly.
3-2