Battery Charging; Maintenance, Storage And Transportation - Segway SNARLER AT6 S Owner's Manual

MAINTENANCE, STORAGE AND TRANSPORTATION

1. Remove the battery cover screw
2. Remove battery press plate
3. Turn up the Protective rubber sleeve.
4. Remove the battery negative pole screw and disconnect the
black (negative) battery cable.
5. Remove the battery (positive) pole screw and disconnect the
red (positive) battery cable.
6. Remove the battery from the ATV.

Battery Charging

When charging, the hydrogen produced by the 12V battery is
combustible explosive gas. Therefore, please follow the following
If charging the 12V battery is still installed in the vehicle, be sure to
Make sure the power switch on the charger is off when connecting and
disconnecting the charger cable to the 12V battery.
Only charge slowly (5A or less). If charge quickly, the 12V battery may
2
NOTICE
precautions before charging:
disconnect the ground cable.
explode.
154
1
with a tool.
.