Cvt Belt - Segway Villain SX10 Owner's Manual

Radiator Coolant
To ensure that the coolant maintains its ability to protect the engine, we
recommend that the system be completely flushed every five (5) years with new
antifreeze at a 50/50 premix.
A steam overflow can cause burns.Do not remove the pressure
cap when the engine is warm or hot.The engine must be
cooled before the pressure cap is removed
Replace the coolant with a 50/50 premix of fresh antifreeze when any cooling
system fluid is discharged for maintenance or repair. If the recovery bottle is empty,
check the liquid level in the radiator and add coolant as needed.
1. After removing the cargo bed.
2. Remove the pressure cap.
3. Add the coolant slowly through the radiator filling port using a funnel.
4. Reinstall the pressure cap. The use of non-standard pressure caps will affect
the normal operation of the recovery system. Your Segway dealer can provide
the correct replacement parts.
Replace the CVT drive belt according to the specified time listed in the vehicle
maintenance schedule. If the belt is damaged, it should be replaced.
When replacing the belt, clean the CVT housing pipe, clutch and the engine
compartment for debris.
Failure to remove all debris when the belt is replaced can result
in vehicle damage, loss of control and serious injury or death
!
CAUTION

CVT Belt

! WARNING WARNING
Stop the engine before
replacement and allow the
vehicle to cool down.
1
CVT cover bolt
2 CVT cover
3
CVT cover seal
4
CVT belt replacement
tool
4-15