Replacement - Datalogic Matrix 300N Series Product Reference Manual

Replacement

CAUTION
The Restore function also provides easy and secure Single Device Replacement:
1. Remove the device to be replaced.
2. Connect the new device (make sure the new device has been previously set to fac-
3. Run the Restore procedure by selecting either Single Reader Restore (from file on
NOTE
The replacement device must be the exact same model as the device it is
replacing.
tory default).
PC) or Restore from external storage device item (see: Restore procedure).
In case of Backup or Restore operation failures, error messages will be
displayed in the Monitor Diagnostic page.
BACKUP AND RESTORE THROUGH DL.CODE
PRODUCT REFERENCE GUIDE
173