Auxiliary Rs232 Interface - Datalogic Matrix 300N Series Product Reference Manual

CBX ELECTRICAL CONNECTIONS

AUXILIARY RS232 INTERFACE

The RS232 auxiliary interface is available for Point-to-Point connections. When it is con-
nected to the host computer it allows transmission of code data.
The parameters relative to the aux interface (baud rate, data bits, etc.) can be defined
through the Reading Phase step (Channels) in DL.CODE.
The 9-pin female Auxiliary Interface connector inside the CBX is the preferred connector
for temporary communication monitoring.
If permanent system wiring is required, the following pins are used to connect the
RS232 auxiliary interface:
NOTE
72
MATRIX 300N
Figure 47 - 9-pin female connector
CBX100/500
TX
RX
SGND
Figure 48 - RS232 Auxiliary Interface Connections
Do not connect the Aux Interface to the CBX spring clamp connectors and
the 9-pin connector simultaneously.
5 1
9 6
Description
Auxiliary Interface Transmit Data
Auxiliary Interface Receive Data
Auxiliary Interface Reference
User Interface
RX
Reference