Power Over Ethernet (Poe) Models - Datalogic Matrix 300N Series Product Reference Manual

Power over Ethernet (PoE) Models

On-Board Ethernet Network Connector Pinout
Pin
1
2
3
4
CAUTION
-
Figure 3 M12 D-Coded Female Ethernet Network Connector
Name
TX+ / DC-
RX+ / DC+
TX- / DC-
RX- / DC+
Matrix 300N PoE models only accept Alternative A (power over RJ45 pins 1,
2, 3, 6), Class 0 power levels. Use an Endspan or Midspan PSE device that
supports this configuration (i.e. PoE switch or Power over Ethernet
Adapter).
Alternative B (power over RJ45 pins 4, 5, 7, 8) using an Endspan or Mid-
span PSE device is not supported.
Figure 4 - Matrix 300N PoE PSE Endspan Alternative A Connections OK
ON-BOARD ETHERNET CONNECTOR
Description
Transmit data (+) DC power (-)
Received data (+) DC power (+)
Transmitted data (-) DC power (-)
Receive data (-) DC power (+)
PRODUCT REFERENCE GUIDE
217