Master Configuration - Datalogic Matrix 300N Series Product Reference Manual

INTERNAL NETWORK CONFIGURATIONS

Master Configuration

First start with the desired device to assign as ID-NET Master (current default setting is
Slave). Click on Setup Internal Network Configuration from the Task area.
You will be advised that the device role will be changed to Master.
Click OK. The Net Autoset feature automatically starts to find Slave devices connected to
the ID-NET network of the Master.
When finished, all the Slaves should have been correctly recognized. If not, verify all
device connections and power and then repeat the operation by clicking on the Start
Net Autoset button.
157
PRODUCT REFERENCE GUIDE