Ethernet Connection - Datalogic Matrix 300N Series Product Reference Manual

ETHERNET CONNECTION

The Ethernet connection is possible in two different layouts.
In a Point-to-Point layout the reader is connected to a local host by using a CAB-ETH-
M0x cable. There is no need to use a crossover adapter since Matrix 300N incorporates
an autocross function.

Matrix 300N
Alone
All devices always support multiple output channels (i.e. for data monitoring).
CAB-ETH-M0x
CBX
CAB-DSxx-S

Figure 64 - Ethernet Point-to-Point Layout
PG6000

 Ethernet Interface
Auxiliary Serial Interface (RS232 - Data Monitor)

 External Trigger (for One Shot or Phase Mode)
PRODUCT REFERENCE GUIDE
ETHERNET CONNECTION
Host
85