Output 1 And 2 Connections Using Matrix 300N Power - Datalogic Matrix 300N Series Product Reference Manual

CBX ELECTRICAL CONNECTIONS

Output 1 and 2 Connections Using Matrix 300N Power

CAUTION
Output 1 Device
Power to Out-
put Device
Output
Device
Reference
Output 1 Device
Power to Out-
put Device
Output Device
Reference
Output Signal
Output 1 and 2 Connections Using External Power
Output 1 Device
Pulled up to External
Output Device Power
80
MATRIX 300N
Power from the Vdc/GND spring clamps is available directly to the Output
Device on the +V/-V spring clamps, and does not pass through the Power
Switch (ON/OFF) inside the CBX. Disconnect the power supply when
working inside the CBX.
Output
Signal
Figure 58 - PNP/Open Emitter Output Using Matrix 300N Power
Figure 59 - NPN/Open Collector Output Using Matrix 300N Power
Output
Signal
Figure 60 - PNP/Open Emitter Output Using External Power
Output 2 Device
Output
Power to Out-
Signal
put Device
Output Device
Reference
Output 2 Device
Power to Out-
put Device
Output Device Output
Reference Signal
Output 2 Device
Pulled up to External
Output Device Power
Output
Signal