On-Board Ethernet Interface; User Interface - Serial Host - Datalogic Matrix 300N Series Product Reference Manual

ON-BOARD ETHERNET INTERFACE

The on-board Ethernet Interface can be used for TCP/IP communication with a remote
or local host computer by connecting the reader to either a LAN or directly to a host PC.
There is no need to use a crossover adapter since Matrix 300N incorporates an auto-
cross function.
A CAB-ETH-M0x cable can be used to connect to a LAN.
On the Matrix 300N on-board Ethernet interface the following communication channels
are available:
•
•
•
•
The following Fieldbus protocols are also available over the on-board Ethernet inter-
face:
•
•
•
For further details refer to the Help On Line page of the Reading Phase step (Channels)
and (Fieldbuses) in DL.CODE.

USER INTERFACE - SERIAL HOST

The following table contains the pinout for standard RS232 PC Host interface. For other
user interface types please refer to their own manual.
TCP Client
TCP Server
UDP Channel
FTP Client
EtherNet/IP
PROFINET IO
Modbus TCP Client
5
1
6 9
9-pin male connector
Pin Name
2 RX
3 TX
5 GND
RS232 PC-side Connections
1
14
Pin
3
2
7
ON-BOARD ETHERNET INTERFACE
13
25
25-pin male connector
Name
RX
TX
GND
PRODUCT REFERENCE GUIDE
83