CBX ELECTRICAL CONNECTIONS
POWER SUPPLY
Power requirements and conditions depend on the Matrix 300N model: Standard or
PoE (Power over Ethernet).
Standard Models
For these models power can be supplied to the reader through the CBX100/500 spring
clamp terminal pins as shown in Figure 34:
The power must be between 10 and 30 Vdc only.
It is recommended to connect the device CHASSIS to earth ground (Earth) by setting the
appropriate jumper in the CBX connection box. See the CBX Installation Manual for
details.
Power Over Ethernet (PoE) Models
The Ethernet pinout is as follows:
Pin
1
2
3
4
62
MATRIX 300N
Power Supply
VG
Earth
V+
Figure 34 - Power Supply Connections
Figure 35 - M12 D-Coded Female Ethernet Nerwork Connector
Name
Description
TX+/DC-
Transmit data (+) DC power (-)
RX+/DC+
Received data (+) DC power (+)
TX-/DC-
Transmitted data (-) DC power (-)
RX-/DC+
Receive data (-) DC power (+)