Restore; Replacement - Datalogic STS320 Series Installation Manual

SOFTWARE CONFIGURATION

Restore

To perform a Restore, from the DL.CODE Device menu, select Restore from external
storage device and follow the procedure; then perform a backup selecting Internal Net-
work replacement (from a file on PC) and follow the procedure.

Replacement

CAUTION
The Restore function also provides easy and secure Single Device Replacement:
1. Remove the device to be replaced by loosening the screws on the fast bracket,
2. Connect the new device (make sure the new device has been previously set to fac-
3. Run the Restore procedure by selecting Restore from external storage device
NOTE
26 STS320
The replacement device must be the exact same model as the device it is
replacing.
mounting the fast bracket on the new device, and fixing it to the array mounting
bracket making sure it is aligned, (screws fully seated into the end of the fast
bracket slots). Refer to the Product Reference Guide for more details.
tory default).
item (see: Restore procedure).
In case of Backup or Restore operation failures, error messages will be
displayed in the Monitor Diagnostic page.