Maximum Line Speed And Exposure Time Calculations - Datalogic Matrix 300N Series Product Reference Manual

READING FEATURES
MAXIMUM LINE SPEED AND EXPOSURE TIME
CALCULATIONS
The Exposure Time (or Shutter) parameter defines the time during which the image will
be exposed to the reader sensor to be acquired. This parameter depends heavily on the
environmental conditions (external lighting system, image contrast etc.).
In general, a longer time corresponds to a lighter image but is susceptible to blurring
due to the code movement; a shorter exposure time corresponds to a darker image.
NOTE
Assuming:
•
•
•
The essential condition to avoid blurring effects between two adjacent elements in a
dynamic reading application is:
The maximum (theoretical) line speed LS can be calculated as follows:
T
exp (min)
can be evaluated in static reading conditions and depends on the Matrix reader model
selected for the application (internal lighting system, optical lens, reading distance) and
on any external lighting system. It may also depend on code printing quality, and reader
position.
Example
A Matrix 300N using:
has a maximum line speed of:
132
MATRIX 300N
The following considerations must be applied only when the internal
lighting system and 2D codes are used. The Maximum line speed allowed
for linear codes or postal code reading applications heavily depends on
the direction of symbol movement. When the direction of movement is
parallel to the elements of the code, the maximum speed is greater.
X: Code Resolution (mm)
T : Exposure Time (s)
exp
LS: Line Speed (mm/s)
is the minimum Exposure Time value obtainable for the specific application. It
Internal Lighting Mode = Very High Power Strobe

Exposure Time = 100 s
Code Resolution (X) = 0.254 mm (10 mils)
0.254 (mm) / 0.0001 (s) = 2540 mm/s
LS  T  X
exp
X / T = LS
exp (min) (max)