Table of Contents
Advertisement
Telephone
Telephone
We recommended you install a telephone near the instrument so, if necessary, you
can conveniently operate the system while speaking with Thermo Fisher
Scientific Technical Support. (Refer to Appendix B,
for a list of Thermo Fisher Scientific offices worldwide.) The telephone line
should accept digital transmissions for direct connection to the FOCUS GC. The
telephone outlet should be within 2 m (6 ft) of your system.
Required Tools
The following tools are required for the installation and maintenance of your
FOCUS GC system. Some of them are supplied with the instrument.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Site Preparation and Installation Manual
two 16 X 17 mm open-ended wrenches
two 12 X 14 mm open-ended wrenches
two 8 X 10 mm open-ended wrenches
two 7 X 6 mm open-ended wrenches
two 7/16 X 3/8-in. open-ended wrenches
#1 and #2 cross-recessed (Phillips
small and large common screwdrivers
wire strippers
6-in. adjustable (Crescent
®
elbow (Channelok
) pliers
a pen light
steel rule tape
®
Teflon
tape
tweezers
12-in. adjustable (Crescent
1/8-in. tubing cutter
®
) screwdrivers
®
) wrench
®
) wrench
Laboratory Preparation
Customer
Communication,
Chapter 1
37
Advertisement
Table of Contents
