To Conduct An Emv Chip Card Transaction; To Conduct A Magnetic Stripe Transaction - Ingenico Move/5000 Quick Reference Manual

To Conduct an EMV Chip Card Transaction

1. Tap the transaction icon on the home screen, or press [Enter]
key to enter the main transaction menu and then select
transaction type
2. Follow the prompts displayed on the screen accordingly
3. Position the chip card with the chip side facing upward, as
shown below
4. Insert the chip card into the smart card reader slot in a smooth,
continuous motion until it seats firmly
5. Remove the card only when the screen indicates the
transaction is complete
CAUTION:

To Conduct a Magnetic Stripe Transaction

1. Tap the transaction icon on the home screen, or press [Enter]
key to enter the main transaction menu and then select
transaction type
2. Follow the prompts displayed on the screen accordingly
3. Position a magnetic card with the stripe in the side card reader
facing inward, toward the keypad
4. To ensure a proper read of the magnetic swipe card, the user
should insert the magnetic card from the top of the unit, as
shown below
5. Swipe the card through the magnetic card reader
6. The screen indicates the transaction is complete
Leave the chip card in the reader until the
transaction is complete. Premature card
removal will invalidate the transaction.
19