D-3.9 Changing The Hydraulic Oil - Terex Genie GTH-4013 Operator's Manual

■
D-3.9 CHANGING THE HYDRAULIC OIL
To change the hydraulic oil, proceed as follows:
1 Stop the machine on a level ground and make sure
the parking brake is engaged.
2 Release the pressure from the hydraulic circuit.
3 Place a container of suitable size under the drain
plug, placed in the lower part of the reservoir, and
collect any oil leaks.
4 Remove the drain plug
into the container.
5 Remove the inspection cover of tank
6 Carefully wash the tank with Diesel oil and blow a
jet of compressed air.
7 Refit the drain plug and the inspection cover.
8 Add new oil by making sure that it matches the
recommended type indicated in
5.2.2 until it is level with
SERVICE INTERVAL
Running-in ____________________________ None
Ordinary ________________ Every
Handler with telescopic boom GTH-4013
MAINTENANCE
and allow oil to flow out
.
paragraph D-
.
1000
hours
Page
Document 57.0007.0200 - 01/2006
D-14