Table of Contents
Advertisement
Observe and obey:
☛ The operator can only perform the routine
maintenance operations envisaged in this manual.
☛ Scheduled maintenance procedures shall be
completed by qualified technical personnel
according to the manufacturer's specifications.
Maintenance symbol legend:
IMPORTANT
The following symbols are used in this manual to help
you understand better the instructions provided. When
one or more symbols appear at the beginning of a
maintenance procedure, they indicate the following:
Indicates that tools are required to
perform the procedure.
Indicates that new parts are required to
perform the procedure.
Indicates that a cold engine is required
to perform the procedure.
SERVICE INTERVAL
Running-in _________________________________
Ordinary ___________________________________
Indicates the time interval for the
maintenance jobs expressed in working
hours.
Handler with telescopic boom GTH-4013
MAINTENANCE
A thorough and regular maintenance keeps the
machine in a safe and efficient working condition.
For this reason, it is advisable to wash, grease and
service the machine properly, especially after having
worked under particular conditions (muddy or dusty
environments, heavy operations, etc.).
Always ensure all machine components are in good
condition. Check for oil leaks or loosening of guards,
and make sure that the safety devices are efficient. In
case of defects, find and rectify them before using the
machine again.
The maintenance interventions are based on the
machine working hours. Regularly check the hour-
meter and keep it in good condition to define the
maintenance intervals correctly.
Not respecting the ordinary maintenance schedule of
this manual automatically voids GENIE warranty.
For the engine maintenance, please refer to the
specific Operator handbook supplied with the
machine.
D-2
Page
Document 57.0007.0200 - 01/2006
INTRODUCTION
IMPORTANT
Advertisement
Table of Contents
