Lifetime; Items Supplied; A-7.1 Literature Supplied - Terex Genie GTH-4013 Operator's Manual

A-6 LIFETIME
The lifetime of the machine is 10000 hours provided
all checks, service jobs and overhauls are done at the
times scheduled.
This lifetime should be halved if the handler is used
with an aerial man-platform.
DANGER
After this time, the machine must compulsorily be
inspected and tested by the Manufacturer before
being used again.
IMPORTANT
Five years or 6000 hours after the first placing into
operation of the machine (whichever occurs first),
check the state of the structure paying an extreme
attention to the welded supporting joints and the
pins of both boom and platform (see
Handler with telescopic boom GTH-4013
GENERAL INFORMATION
Following items are supplied together with the
machine:
- Spanner CH 19
- Allen wrench CH 6
- 12 V lamps
■ A-7.1
The machines comes with the following literature:
-
chap. D-3.18).
-
-
-
A-24
Page
Document 57.0007.0200 - 01/2006
A-7 ITEMS SUPPLIED
Description
(for fork positioning)
(for fork positioning)
(spare)
LITERATURE SUPPLIED
Machine operator's handbook
Engine use and maintenance manual
Spare parts catalogue
Warranty and handing over certificate
GTH-4013
✘
✘
✘