Table of Contents
Advertisement
C-6 TRANSPORTING THE MACHINE
■ C-6.1 MOVING A DISABLED MACHINE
Tow the machine only when no alternative is possible,
since this operation may result in serious damage to
the transmission. When possible, repair the machine
on site.
When the machine shall absolutely be towed:
•
Unlock the parking brake.
•
Tow the machine for short distances and at a low
speed only.
•
Use a rigid drawbar.
•
Select the two-wheel steer.
•
Put the transmission selection lever to neutral.
•
Put the gearbox lever to neutral
6.1.1)
•
Raise the front wheels of the machine and remove
the Cardan shaft of the transmission
6.1.2).
•
When possible, start the engine and use the
hydraulic drive and the braking system.
Handler with telescopic boom GTH-4013
OPERATING INSTRUCTIONS
■ C-6.1.1
Do not tow the machine without setting the
mechanical gear lever to neutral position.
To set the gear lever to neutral:
•
•
•
(see chap. C-
(see chap. C-
C-38
Page
Document 57.0007.0200 - 01/2006
Setting the gear lever in neutral
CAUTION
Disconnect the cylinder feeding pipes
and plug them.
Pry the cursor of the gear lever
position.
Plug holes
and
of the cylinder.
and
to neutral
Advertisement
Table of Contents
