C-3.4.2 Emergency Stop; C-3.4.3 Disabling The Overload Warning System - Terex Genie GTH-4013 Operator's Manual

■ C-3.4.2
Emergency stop
The operated functions can be stopped at any time by
pressing the emergency stop button 21.
By pressing this button, the engine of the machine is
shut down.
Before restarting the engine, reset the button by
rotating clockwise.
CAUTION
Before restarting the machine, find and rectify the
faults that caused the emergency.
22
Handler with telescopic boom GTH-4013
OPERATING INSTRUCTIONS

■ C-3.4.3 Disabling the overload warning system

The key switch nder cap 22 is used to deactivate the
load limiter.
WORKING WITH THE OVERLOAD WARNING
SYSTEM CUT OUT CAN RESULT IN A MACHINE
OVERTURNING AND IN SERIOUS INJURY.
The load limiting system disconnect key is active
only in the jobsite mode.
When the machine is in the "Platform" mode, the
limiting system cannot be deactivated.
The moment limiter disconnect key should be kept
by the site manager or the person responsible for
the jobsite safety.
21
C-18
Page
Document 57.0007.0200 - 01/2006
DANGER
IMPORTANT
IMPORTANT