A-1.3 Explanation Of The Different Symbols Used On The Machine - Terex Genie GTH-4013 Operator's Manual

■ A-1.3
EXPLANATION OF THE DIFFERENT
SYMBOLS USED ON THE MACHINE
This paragraph illustrates those symbols that are
normally applied on the main control devices and
instruments of a standard machine, and those that can
be applied on accessories or special attachments.
They are mainly (ISO) standardised symbols that are
now part of the common life. But we consider useful to
explain them once again.
Symbol Description
Hazard warning lights
Windscreen washer
Cab ventilation fan
Diesel engine water temperature
Fuel level
Hydraulic oil temperature
Position lights
High beam
Low beam
Fog lamp
Turn signals
Parking brake
Handler with telescopic boom GTH-4013
GENERAL INFORMATION
Spend the necessary time to become familiar with
these symbols and to learn their meaning.
Symbol
A-10
Page
Document 57.0007.0200 - 01/2006
IMPORTANT
Description
Battery charge
Attachment pushbutton (if any)
Steering mode switch
Brake pressure
Engine oil pressure
Boom up
Boom down
Boom out
Boom in
Attachment locked
Attachment unlocked
Fork pitching forward
Fork pitching back
Right outrigger down