C-3.5 MACHINE SWAY CONTROL
IMPORTANT
Do not operate the sway control, when boom is
raised beyond the horizontal position.
To sway the machine:
•
Press button 32 and hold it down until the
coòplete execution of the function selected:
select X to raise the right-hand side of the
machine
select Y to lower the right-hand side of the
machine.
IMPORTANT
Do not operate the control lever. The sway control
is activated by simply pressing button
Handler with telescopic boom GTH-4013
OPERATING INSTRUCTIONS
Check that the machine is level on inclinometer 37.
The water level must be right in the middle of the
instrument.
In an alarm condition (red stability LED indicator
ON) or when the boom is raised beyond the
horizontal position, the function-key 32 is not
enabled.
.
C-23
Page
Document 57.0007.0200 - 01/2006
DANGER
IMPORTANT