Oil Change Schedule - Terex Genie GTH-4013 Operator's Manual

Every 3 working months
1 Check the efficiency of the block valves - see
chap. D-3.17
Every 500 working hours or every six months
Jobs to be done in addition to those above.
1 Visually check the smoke quantity evacuated from
the engine exhaust
2 Check the tightening of the engine fixing screws
3 Check the tightening of the cab fixing screws
4 Check the backlash between pins and bushings
in all joints
5 Change the hydraulic oil filter in the tank
6 Have the hydraulic system checked by a skilled
technician
7 Change the main cartridge of the engine air filter
8 Renew the cartridge of the engine oil filter and the
fuel filter
9 Change the oil of the front and rear differential
casings
Every 1000 working hours or yearly
Jobs to be done in addition to those above
1 Change the safety element of engine air filter
2 Change the oil of the gearbox
3 Change the oil in the four wheel reduction gears
4 Change the hydraulic oil
■
D-2.1

OIL CHANGE SCHEDULE

Intervento
Oil level check
Engine
First change
Subsequent changes
Oil level check
Axles and
power
First change
divider
Subsequent changes
Hydraulic Oil level check
oil
First change
Subsequent changes
* whichever occurs first
Handler with telescopic boom GTH-4013
MAINTENANCE
Every 2000 working hours or every two years
Jobs to be done in addition to those above
1
Every 6000 hours or 5 years and, subsequently,
every 2 years
Jobs to be done in addition to those above
1
ore di intervalli di
lavoro* tempo*
10
50
250 monthly
250 monthly
-
1000 yearly
10
-
1000 yearly
D-5
Page
Document 57.0007.0200 - 01/2006
Change the engine coolant
Check that the structure is intact paying a special
attention to the welded supporting joints and the
boom pins (see chap.
Tipo olio
daily SHELL RIMULA 15W-40
- (API CH-4/CG-4/CF-4/CF; ACEA E3;
MB228.3)
TRACTORENAULT THFI 208 LF SAE 80W
- API GL4 / FORD M2C 86B
MASSEY FERGUSON M 1135
daily SHELL TELLUS T 46
- DENISON HF-1, DIN 51524 part 2 & 3
D-3.18).