C-2.4 Adjusting The Steering Column; C-2.5 Adjusting The Rear View Mirrors; C-2.6 Switching On The Cab Interior Lamp - Terex Genie GTH-4013 Operator's Manual

■ C-2.4
ADJUSTING THE STEERING COLUMN
Both steering column and dashboard can be set to a
different angle.
To adjust the steering wheel angle, unlock lever 1 and
pull or push the steering wheel to the required position,
then re-lock lever 1.
DANGER
Before driving the machine, ensure the steering
wheel is perfectly clamped.
Handler with telescopic boom GTH-4013
OPERATING INSTRUCTIONS
■ C-2.5
The machine is fitted with two rear view mirrors:
•
•
■ C-2.6
The ceiling light fixture is fixed to the rear top strut of
the cab. The relevant lamp is switched on/off by switch
A.
C-6
Page
Document 57.0007.0200 - 01/2006
ADJUSTING THE REAR VIEW MIRRORS
Rear view mirror 55 is located on a special
supporting bracket in advanced position and allows
checking the area behind the machine, on the right-
hand side. To adjust its position, manually rotate
the joint it is fitted with.
Rear view mirror 56 is placed on the left upper post
of the windscreen and allows checking the area
behind the machine, on the left-hand side. To adjust
its position, manually rotate the joint it is fitted with.
55
SWITCHING ON THE CAB INTERIOR
LAMP
56