Table of Contents
Advertisement
■ C-3.3.2
Warning lights (ref. 7)
7.1
Warning light - fuel reserve
This light comes on to alert to a low fuel level in
the tank.
7.2
Warning light - glow plugs preheating
This light indicates the pre-heating of the engine
glow plugs. Before starting the engine wait for
this light to go off.
If the light fails to go off, a glow plug could be
broken.
7.3
Warning light - low battery charge
Signals a low charge by the alternator.
7.4
Warning light - low engine oil pressure
This red light comes on to warn that the pressure
in the engine lubrication system is not enough
for a proper operation.
Stop the engine and find and rectify the problem.
7.5
Warning light - parking brake engaged
When ON, this light indicates that the parking
brake is engaged.
7.6
Warning light - low brake pressure
It lights when the pressure of the braking circuit
is too low for a correct functioning.
7.7
Warning light - hydraulic oil filter clogged
When this lamp sets to on, immediately change
the oil filter on the return line to the tank.
7.8
Warning light - air filters restricted
When this lamp come on, proceed with cleaning
or changing the air filter cartridge (see
"Maintenance" section).
7.1
7.2
7.3
7.4
Handler with telescopic boom GTH-4013
OPERATING INSTRUCTIONS
5
0
7.5
7.6
7.7
Document 57.0007.0200 - 01/2006
7.9
Warning light - electronic gearbox
malfunction
This light comes on to alert to a failure of the
electronic gearbox. Contact GENIE Service
Centre or your dealer.
7.10 Warning light - water in fuel
This light comes on to alert to the presence of
water in fuel.
7.11 Warning light - low hydraulic oil level
This light comes on to alert to a low level of the
hydraulic oil for a correct functioning. Replenish
and eliminate the oil leak.
7.12 Warning light - high beam
Blue warning light that signals when high beam
is ON.
7.13 Warning light - position lights
Green warning light that signals when position
lights are ON.
7.14 General alarm warning light
This light comes on to alert to a failure of the
machine. The light also comes on when the
mechanical gear is not put. Contact GENIE
Service Centre.
7.15 Warning light - high coolant temperature
This light comes on to alert to a too high tempe-
rature of the cooling medium.
25
30
7.8
7.9
C-15
Page
7.14
7.10
7.11
7.12
7.15
7.13
Advertisement
Table of Contents
