C-3.2.3 Turn Signals - Windscreen Wiper - Terex Genie GTH-4013 Operator's Manual

■ C-3.2.3 Turn signals - Windscreen wiper - Horn
- Lights
■ Horn function:
When sliding the lever along its axis, horn switches
on, independently from other pre-set functions.
■ Windscreen washer function:
Push the second stage of the lever along its axis to
direct a jet of water onto the cab windscreen.
■ Windscreen wiper function:
To operate the windscreen wiper, rotate the lever tip to
one of the four positions:
I Wiper OFF
0 Wiper OFF
J Low speed
I
High speed
Handler with telescopic boom GTH-4013
OPERATING INSTRUCTIONS
■ Lights function:
To switch the handler lights, lever can be set to three
different positions along its vertical axis:
0
1
2
■ Turn signals function:
Set lever to pos. 1 to indicate a turn leftwards or to
pos. 2 to indicate a turn rightwards.
C-10
Page
Document 57.0007.0200 - 01/2006
low beam ON, stable condition
high beam ON, stable condition
high beam used for intermittent signalling; when
released, the lever springs back to position 0.