Table of Contents
Advertisement
■ C-6.2 ROAD OR SITE TRANSFER
When travelling on public roads, strictly obey the local or national
road traffic regulations.
Besides, take into account the following general precautions:
•
Align the rear wheels.
•
Select the two-wheel steer.
•
Sway the machine.
•
Lock the machine as indicated in the Registration Card (only
for the Italian market):
Lock the boom sections, the lifting cylinder, the attachment
rotation cylinder, the outriggers (see photo).
•
Lock the rear wheel steering using the special pins (if any).
•
Cover the teeth of the conventional
forks with the special guard;
or withdraw the
floating forks.
ATTENTION
With the floating forks pitched
back, do not move the fork
pitching cylinder as the machine
could suffer from damage.
•
Retract boom and attachment to transfer position.
•
Set the ROAD-CAB-PLATFORM switch to "ROAD".
•
Make sure that lights, horn and turn signals are in working
order.
•
Engage a high speed.
•
Do not change mechanical gear when the machine is running.
•
The transfer speed of the vehicle will depend on the engine
rpm and the position of the control lever.
IMPORTANT
Public road circulation is allowed only for transferring an
unloaded machine.
Do not use the machine to tow trailers.
Handler with telescopic boom GTH-4013
OPERATING INSTRUCTIONS
C-40
Page
Document 57.0007.0200 - 01/2006
Only for the Italian market
Advertisement
Table of Contents
