Table of Contents
Advertisement
■
D-3.11 OIL LEVEL IN THE DIFFERENTIAL GEARS
To check the oil level in the front and rear differential
gears:
•
Stop the machine on a level ground and engage the
parking brake.
•
Loosen level plug
hole.
•
If necessary, top-up through hole
out from hole
.
•
Refit and tighten plugs
To change the oil:
•
Place a container of suitable size under drain plug
.
•
Loosen the drain plug, the level plug
and allow oil to flow out from the reduction gear.
•
Refit and tighten drain plug
•
Add new oil through the filler until it is level with hole
.
•
Refit and tighten plugs
SERVICE INTERVAL
Running-in _________ Within the first
Ordinary __________________ Every
Handler with telescopic boom GTH-4013
and check if oil is level with the
until oil comes
and
.
and the filler
.
and
.
10
hours
250
hours
Document 57.0007.0200 - 01/2006
MAINTENANCE
■
D-3.12
To check the oil level within the wheel reduction gears:
•
Stop the machine on a level ground and ensure the
parking brake is engaged and plug
horizontal axis.
•
Clean the plug all around, then remove it and check
if oil is level with the hole.
•
If necessary, add new oil through hole
level.
•
Refit the plug.
To change the oil:
•
Stop the machine and ensure the plug is oriented
along the vertical axis.
•
Place a container of suitable size under the reduction
gear plug.
•
Unscrew plug
gear.
•
Rotate the wheel by 90° until the plug finds again
on the horizontal axis.
•
Add new oil through hole
•
Refit and tighten plug
Running-in _________ Within the first
Ordinary __________________ Every
D-16
Page
OIL LEVEL IN THE (front/rear) WHEEL
REDUCTION GEARS
and drain any oil from the reduction
.
.
SERVICE INTERVAL
finds on the
until it is
10
hours
250
hours
Advertisement
Table of Contents
