Fixed Hook On Plate - Terex Genie GTH-4013 Operator's Manual

■
F-1.4

FIXED HOOK ON PLATE

GTH-4013
Technical data
Width
Length
Height
Weight
Handler with telescopic boom GTH-4013
OPTIONAL ATTACHMENTS
Payload Code
kg 4000 59.0700.4000
mm 970
mm 620
mm 600
kg 132
Document 57.0007.0200 - 01/2006
Application
Quick-coupling fitted attachment for lifting loads by
means of special slings.
Safety
Strictly obey the general safety precautions given in
section B "SAFETY".
Do not oscillate the load.
Do not drag hooked loads.
Lift the load before extending the boom.
Operation
Fork the hook and hold it in position by means of the
locking cylinder.
All loads must be bridled with special textile slings or
chains in compliance with all pertinent regulations.
To handle the load, raise and rotate the telescopic
boom of the handler.
Maintenance
Visually check the hook for damage before using it.
Check the safety catch is in good working order.
IMPORTANT
The fixed hook has been designed to support a load
of 5400 kg. The max payload corresponds to the
nominal capacity rating of the handler on which it is
installed and is indicated on the load charts supplied
with the equipment.
IMPORTANT
Make sure this attachment can be used in the
destination country of the machine. In Italy, this
attachment must be enrolled at ISPESL and
submitted to yearly test.
Application must be submitted directly by the user.
F-6
Page