Table of Contents
Advertisement
■ B-3.6
DAMAGED MACHINE HAZARDS
• Do not use a damaged or defective machine.
• Do a thorough pre-operation inspection of the
machine and test all functions before each work
shift. Tag and remove from service a damaged or
defective machine.
• Make sure that all maintenance jobs have been
carried out as specified in this manual and the
appropriate service manual.
• Make sure that all decals are in place and legible.
• Make sure that the operator's, safety and
responsibilities manuals are intact, legible and
placed in the special container located in the
machine.
■ B-3.7
PERSONAL INJURY HAZARDS
• Do not operate the machine in case of hydraulic
oil or air leak. Air or hydraulic oil leaks can pene-
trate or burn the skin.
• Always operate the machine in a well ventilated
area to avoid carbon monoxide poisoning.
• Do not lower the boom if the area underneath is
not clear of personnel or obstructions.
Handler with telescopic boom GTH-4013
SAFETY PRECAUTIONS
■
Several safety devices have been fitted to the
machine. They must never be tampered with or
removed
Regularly check the efficiency of such devices
check card, chap.
In case of faults, stop working immediately and
proceed in replacing the defective device.
For the checking procedures, read
■
The moment limiting system has been developed to
help the operator to maintain the machine longitudinal
stability. Audible and visual messages are provided
when the limits of longitudinal stability are being
approached.
However this device cannot replace the experience of
the operator. It is up to the user to adopt the necessary
safety measures to work within the rated limits of the
machine.
B-8
Page
Document 57.0007.0200 - 01/2006
B-4 SAFETY DEVICES
DANGER
(see chap.
A-3.5).
G-5).
B-5 MOMENT LIMITING SYSTEM
(see
chap.
D-3.17.
Advertisement
Table of Contents
