C-3.2.4 Brakes; C-3.2.5 Accelerator Control - Terex Genie GTH-4013 Operator's Manual

■ C-3.2.4
Brakes
23 Service brake pedal
Gradually step on the brake pedal to decelerate and
stop the machine. The pedal operates on the axle
shafts of both axles.
27 Parking brake
To engage the parking brake, pull the lever upward
while holding the locking button pressed down.
Release the button when reaching the required braking
tension. It operates on the axle shafts of the front axle
and, when engaged, it cuts both forward and reverse
gear off.
DANGER
Never use the parking brake to slow down the
machine, unless in an emergency. It may reduce
the brake efficiency.
K
K
K
K
F6
F5
F4
F3
F2
F1
27
Handler with telescopic boom GTH-4013
OPERATING INSTRUCTIONS
K2
K
INT
3
K
K K K K
K K K
K K K K
K K K K
F12 F15 F21 F27
F11 F14 F20 F26
F10 F13 F19 F25
F9 F18 F24
INT
F8 F17 F23
F7 F16 F22
Document 57.0007.0200 - 01/2006
■ C-3.2.5
Accelerator control
24 Gas pedal
Its pressure controls the engine rpm and, coupled to
the gearbox, the machine speed. It is fitted with an
adjustable stop in the lower part,
26 Gas lever
By pulling the lever up, the engine rpm increases
gradually.
To reduce the rpm, set the lever down.
23
C-11
Page
24
26