Engine Air Filter - Terex Genie GTH-4013 Operator's Manual

■
D-3.5

ENGINE AIR FILTER

Clean the engine air filter and replace the elements,
when necessary.
1 Cleaning and changing the external element:
- Stop the engine and engage the parking brake.
- Open the four latches A.
- Remove the protection cap B.
- Extract the external cartridge C.
- Clean the filter bowl.
- Beat the cartridge against a piece of wood surface
to eliminate any dust.
- Dry clean the cartridge (max. pressure: 6 bar).
- Check for cracks in the filtering element.
- Before refitting the cleaned cartridge or a new
one, smear its seal with a thin coat of grease; fit
the cartridge and make sure it is properly
positioned.
- Refit cap B.
ATTENTION
As soon as the warning lamp 7.8 on the cab
dashboard switches on, replace the outer element.
Never wash the cartridge with water or solvents.
2 Changing the internal element:
- See step 1 for removing the outer element
- Extract the internal cartridge D.
- Clean the filter bowl.
- Smear the seal with grease, then mount the new
element and make sure it is correctly positioned.
- Refit the main filter and the cap as described in
point 1.
ATTENTION
The inner element should be replaced every two
times the outer element is replaced.
Never wash the cartridge with water or solvents.
Handler with telescopic boom GTH-4013
MAINTENANCE
D-10
Page
Document 57.0007.0200 - 01/2006
SERVICE INTERVAL
Running-in ____________________________ None
Cleaning ___________________ Every
Outer element change ______ Every
Inner element change _____ Every
10
hours
500
hours
1000
hours