■ C-5.4
CHANGING THE ATTACHMENT
ATTENTION
Use only attachments directly manufactured or
recommended by Terexlift and detailed in the
"Optional attachments" section.
To change an attachment, operate as follows:
•
Drive to the place where you will release the
mounted attachment (when possible, a solid and
sheltered site).
•
Disconnect the quick connectors of the
attachment (if any), and connect the hydraulic
locking pipes of the attachments to couplings A.
•
Rest the attachment flat on the ground.
•
Pitch the attachment holding frame forward and
lower the boom to release the attachment upper
lock.
•
Move back with the machine (or with the boom)
and drive to the new attachment to be coupled.
•
Hold the frame pitched forward and hook the
upper lock of the new attachment.
•
Retract and raise the attachment some
centimetres. It will centre automatically on the
quick coupling frame.
Handler with telescopic boom GTH-4013
OPERATING INSTRUCTIONS
After substitution, visually check the attachment is
correctly coupled to the boom, before operating
the machine. A wrongly coupled attachment may
result in damage to persons or things.
C-36
Page
Document 57.0007.0200 - 01/2006
DANGER