D-3.13 Oil Level In The Gearbox - Terex Genie GTH-4013 Operator's Manual

■

D-3.13 OIL LEVEL IN THE GEARBOX

To check the oil level within the gearbox:
• Stop the machine on a level ground and make sure
the parking brake is engaged.
• Clean level plug A all around.
• Remove the plug and check if oil is level with the
hole.
• When necessary, add new oil through plug A until
it is level with the hole.
• Refit and tighten the plug.
To change the oil:
• Place a container of suitable size under the drain
plug.
• Remove the level plug A and the filler.
• Remove the drain plug B and empty the gearbox.
• Refit and tighten the drain plug B.
• Add new oil through the filler until it is level with hole
A.
• Refit and tighten filler/level plug A.
SERVICE INTERVAL
Running-in _________ Within the first
Ordinary __________________ Every
Handler with telescopic boom GTH-4013
MAINTENANCE
10
hours
250
hours
D-17
Page
Document 57.0007.0200 - 01/2006