Table of Contents
Advertisement
Road traffic data plate
The road traffic data plate
right side of the chassis (only on machines destined for
the Italian market).
This plate shows the road traffic related data and the
weights of the specific machine model.
ROPS-FOPS cab type-approval plate
The ROPS - FOPS type-approval plate
inside the driving cab above the rear glass.
Fork data plate
Placed on the left side of the fork frame.
This plate shows the identification data of fork such as
model, serial number, year of manufacture, weight,
nominal payload, centre of the load and model of the
machine on which the forks are installed.
■ A-2.4
CE MARKING
This machine fulfils the safety requirements of the
Machinery Directive.The conformity has been certified
and the placing of the CE marking on the machine
demonstrates compliance with the regulatory
requirements.
The CE marking is placed directly on the identification
plate of the machine
T E RE XL I F T
ZONA INDUSTRIALE - 06019 UMBERTIDE (PG) - ITALY
Tel. +39 (0) 75 94181 Fax +39 (0) 75 9415382
ASSIEME FORCHE-FORKS ASSY
GROUPE FOURCHES-GABELGROUPPE
JUNTO HORQUILLAS
MODELLO - TYPE - DÉSIGNATION
MODELL - MODELO
N° SERIE - SERIAL N° -N° DE SERIE
- SERIEN N° - N° DE BASTIDOR
ANNO DI COSTRUZIONE -
YEAR OF CONSTRUCTION -
ANNÉE DE CONSTRUCTION -
BAUJHAR - AÑO DE CONSTRUCCIÓN
MASSA - MASS - MASSE -
MASSE - MASA
CENTRO DI GRAVITÀ - CENTER OF
GRAVITY - CENTRE DE GRAVITÉ -
SCHWERPUNKT - CENTRO DE GRAVEDAD
PORTATA NOMINALE - PAY LOAD -
PORTEE NOMINALL - NENN
TRAGFÄHIGKEIT - CARGA NOMINAL
CENTRO DI CARICO - LOAD CENTER -
CENTRE DE CHARGE - LASTPUNKT -
CENTRO DE CARGA
MODELLO MACCHINA - MACHINE MODEL -
DESOGNATION MACHINE - MASCHINEN MODELL
MODELO MÁQUINA
Handler with telescopic boom GTH-4013
GENERAL INFORMATION
is installed on the front
is located
.
s.r.l.
__._____._____
.............
______
____
___
____
___
Document 57.0007.0200 - 01/2006
■ A-2.5
CHASSIS SERIAL NUMBER
The chassis serial number is punched on the front left
part of the chassis side member
■ A-2.6
IDENTIFICATION PLATES OF THE MAIN
PARTS
The plates of the main components, not directly
manufactured by TEREXLIFT srl (for instance, engines,
pumps, etc.), are located where originally applied by
the manufacturers.
TIPO
OMOLOGAZIONE
NUMERO DI IDENTIFICAZIONE
MASSA TOTALE AMMISSIBILE (*)
CARICO MAX ASSE ANTERIORE (*)
CARICO MAX ASSE POSTERIORE (*)
(*) In funzione della gommatura
MASSA RIMORCHIABILE AMMISSIBILE:
-
MASSA NON FRENATA
-
MASSA CON FRENATURA INDIPENDENTE
-
MASSA CON FRENATURA AD INERZIA
-
MASSA CON FRENATURA ASSISTITA
COEFFICIENTE DI ASSORBIMENTO
CORRETTO DEL MOTORE
A-13
Page
.
DATI OMOLOGAZIONE STRADALE
da
kg a
da
kg a
da
kg a
Zona Industriale, I-06019 Umbertide (PG) - Italy
Tel. +39 (0)75 941811 - Fax +39 (0)75 9415382
kg
kg
kg
kg
kg
kg
kg
-1
m
Advertisement
Table of Contents
