Create Your Own Worksheet; Create An Html Document With Word; Create A Configuration File - Fourier MultiLogPRO User Manual

7. Click Run
2.8.3.

Create Your Own Worksheet

Creating a worksheet consist of two steps. First, create an HTML document using
your HTML editor (For example, Word or Front Page). This file should include the
Lab manual and the experiment instructions (see below). The second step is to use
the MultiLab software to create a configuration file, which is a file that will store the
specific settings you wish to define for the experiment. These include the
MultiLogPRO setup, MultiLab's layout, the recording mode, the graph format desired,
special preset graph scaling, sensors measurement etc.

1. Create an HTML Document with Word

Create a new Web page
1. Open Word.
2. In the File menu, click New.
3. Do one of the following:
•
On the General tab, click Web Page to open a blank Web page.
•
On the Web Pages tab, click the template that you would like to
base your Web page on.
4. Enter your texts and pictures.
5. Click Save on the toolbar.
6. Navigate to C:\Program Files\Fourier Systems\MultiLab\Workbook.
7. Click Save.
Create a Web page from an existing Word document
1. Open the existing file with Word
2. In the File menu, click Save as Web Page
3. Navigate to C:\Program Files\Fourier Systems\MultiLab\Workbook.
4. Click Save

2. Create a Configuration File

1. Open the MultiLab program.
2. Click Workbook on the menu bar, and then click create new
worksheet.
3. Double click the file you want to configure to open it:
88 Chapter 2 MultiLab Software
on the main toolbar to begin recording.