Stopwatch - Fourier MultiLogPRO User Manual

To use the photogates together with other sensors operate MultiLogPRO as a data
logger and then analyze the photogates data with the aid of MultiLab's Timing Wizard
(see page 90).
To perform a timing measurement:
1. Connect one or two photogates to MultiLogPRO
Note: MultiLogPRO must be in PC communication mode (see page 18)
2. Use the Forward
to the Timing
3. Press Enter
_ _ _ _ _ T I M I N G _ _ _ _ _
→ M o d e : T i m e S p e e d
M e a s u r e : I n 1
C a r d w i d t h : 3 0 m m
G a t e s d i s t a n c e : 2 0 c m
S t a r t
The arrow indicates that MultiLogPRO is ready to accept the timing
mode
4. Use the arrow buttons to select the desired timing mode:
Stopwatch, Time Speed or Time Speed Acc

1. Stopwatch

_ _ _ _ _ T I M I N G _ _ _ _ _
→ M o d e : S t o p w a t c h
M e a s u r e :
C a r d w i d t h : _ _ _
G a t e s d i s t a n c e :
S t a r t ( > )
In this mode MultiLogPRO operates as a standard stopwatch with resolution of 0.01s.
1. Press Enter
enter the stopwatch mode
2. Press the Forward
3. Press the Forward
4. Press the Backward
14 Chapter 1 MultiLogPRO
and Backward
menu
to display the timing menu:
( > )
_ _ _
_ _ _
four times, then press the Forward
arrow to start measuring time
arrow a second time to stop the watch
arrow to reset the watch
arrow buttons to navigate
arrow to