Create Your Own Worksheet; Create An Html Document With Word; Create A Configuration File - Fourier TriLog User Manual

6. Click Close to return to MultiLab
7. Click Run
3.7.3.

Create Your Own Worksheet

Creating a worksheet consist of two steps. First, create an HTML document using
your HTML editor (For example, Word or Front Page). This file should include the lab
manual and the experiment instructions (see below). The second step is to use the
MultiLab software to create a configuration file, which is a file that will store the
specific settings you wish to define for the experiment. These include the TriLog
setup, MultiLab's layout, the recording mode, the graph format desired, special
preset graph scaling, sensors measurement etc.

1.Create an HTML document with Word

1. Create a new Web page
1. Open Word
2. In the File menu, click New
3. Do one of the following:
•
• On the Web Pages tab, click the
4. Enter your texts and pictures
5. Click Save on the toolbar
6. Navigate to C:\Program Files\Fourier Systems\MultiLab\Workbook
7. Click Save
2. Create a Web page from an existing Word document
1. Open the existing file with Word
2. In the File menu, click Save as Web Page
3. Navigate to C:\Program Files\Fourier Systems\MultiLab\Workbook
4. Click Save

2.Create a configuration file

1. Open the MultiLab program
2. Click Workbook on the menu bar, and then click create new
worksheet
on the main toolbar to begin recording
On the General tab, click Web Page to
open a blank Web page
template that you would like to base
your Web page on
Chapter 3 Working with MultiLab 87