Programming Multilogpro; Setup; Quick Setup - Fourier MultiLogPRO User Manual

2.5. Programming MultiLogPRO

2.5.1.

Setup

1. Quick Setup

Use the Setup wizard to guide you through the setup process.
1. Click Setup wizard
wizard:
The first step is to assign sensors to each input. If you are working
with MultiLogPRO in Auto ID mode, the sensors are selected
automatically as you plug them in to the MultiLogPRO. Otherwise, you
can manually select the sensors you are using from the corresponding
input drop lists.
2. Click Next to move to the second step:
54 Chapter 2 MultiLab Software
on the main toolbar to open the setup
Figure 10: Setup wizard step 1 of 3
Figure 11: Setup wizard step 2 of 3