Accessories - Fourier MultiLogPRO User Manual

5.3. Accessories

Video camera
For use with MultiLab
Input Splitter
Splits one I/O into two inputs
Enables simultaneous use of 8 inputs (analog or digital)
Sensor Cable
Connects MultiLogPRO to the sensors
VERNIER Sensor Adaptor
Enables the connection of all the VERNIER analog sensors (with DIN plugs) to
the MultiLogPRO
Serial Communication Cable
Connects MultiLogPRO to a serial port on the PC
USB Communication Cable
Connects MultiLogPRO to a USB port on the PC
Weather Box
Sealed box, meets IP-65 standards
Used to store the MultiLogPRO while operating in rain or in dusty conditions
Solar cell
Connects to MultiLogPRO's external DC input. Produces 12V @ 5W output
power. Used for when MultiLogPRO is required to work for a long period of time
in the field
220V EUR AC/DC adaptor
Connects MultiLogPRO to EUR mains power
110V USA AC/DC adaptor
Connects MultiLogPRO to USA mains power
220V UK AC/DC adaptor
Connects MultiLogPRO to UK mains power
DT258
DT011
DT022
DT023
DT135
D180
DT177
AC029 (2 units needed)
DT245
DT246
DT282
Chapter 5 Specifications 133